Underground pipeline plugging
Underground pipeline plugging
Glue type: polyurethane potting glue
Features: 300% expansion rate when exposed to water, 0.8MPa water pressure resistance.
Applicable to: water pipe joints, basement cracks.
Similar Posts
Should I use acidic silicone sealant or neutral silicone sealant for my aquarium?
Should I use acidic silicone sealant or neutral silicone sealant for my aquarium? In aquariums (especially for glass bonding and sealing in direct contact with water), neutral silicone sealant must be used, specifically labeled…
Characteristics of alcohol-type silicone glue (de-alcoholization type)
Characteristics of alcohol-type silicone glue (de-alcoholization type) Curing mechanism: Curing by releasing alcohol substances (such as methanol and ethanol) rather than acidic substances (such as acetic acid). ✅ Advantages: No corrosive acid mist, good compatibility…
All the sealant knowledge you want to know is here
1. What should I do if a lot of bubbles appear when applying glue? In general, the causes and solutions of bubbles are as follows: (1) Cause: bubbles generated during glue injection; Solution: smooth glue…
5 Industrial Sealing Failures Solved by MS Polymer Technology
5 Industrial Sealing Failures Solved by MS Polymer Technology Keywords: industrial sealing solutions, manufacturing adhesive failure, chemical resistance sealant Article content Pain point: A car factory suffered an annual recall loss of $2.4M due to…
How long does MS sealant cure in an environment with 70% humidity?
How long does MS sealant cure in an environment with 70% humidity? In an environment with 70% humidity, the curing time of MS sealant depends primarily on temperature; 70% humidity itself has relatively little effect…
What does the “MS” in MS sealant stand for?
What does the “MS” in MS sealant stand for? The “MS” in MS sealant stands for Methyl Methacrylate Silane. It refers to a type of sealant with a silane-modified polyether resin (often referred to as…